Installing The Software - Eicon Technology DIVA USB Benutzerhandbuch

Installing the Software

Before you start, make sure you have your Windows 98 CD-ROM and
information about your ISDN line (see 'Before You Start' on page 10).
To install the software:
After you connect DIVA USB, the 'Add New Hardware Wizard' appears
1.
(which indicates that Windows found an 'Unknown Device').
Click 'Next'.
In the displayed screen, do the following:
2.
In the displayed screen, do the following:
3.
Click 'Next'.
Windows 98 identifies DIVA USB and the location of the drivers.
12
Installing the Software
Click 'Search for the best
driver for your device
(Recommended)'.
Click 'Next'.
If any of these options are
selected, deselect them.
Select 'Specify a location'.
Then, in the edit field directly
below, type:
D:\WIN_9X\INSTALL
\ENGLISH
(where D is your CD-ROM
drive letter).