Press the water filter firmly into the
8.
empty water tank.
Fill the water tank with water up to
9.
the max mark.
Insert water tank into the appli-
10.
ance.
Place a container with a capacity
11.
of at least 1.0 l under the outlet.
Press the "ok" button
12.
and start rinsing.
a Water will now flow through the fil-
ter.
Press "<" button
13.
the menu.
Empty the container.
14.
a The appliance is ready to use.
Removing the water filter
You can also operate your appliance
without a water filter.
Remove the water filter.
1.
Set the water hardness.
2.
→ "Basic settings", Page 48
Tips
¡ You should also change your wa-
ter filter for reasons of hygiene.
¡ With a water filter you need to de-
scale your appliance less fre-
quently.
¡ If you use a water filter, your coffee
will be more flavoursome.
¡ The water filter can be purchased
from retailers or customer service.
→ "Accessories", Page 42
operation
7 Basic operation
operation
7.1 Switching the appliance
on or off
Press
.
▶
to save the setting
to exit
When the appliance is switched on
or off, it will rinse itself automatic-
ally. When switched off, the appli-
ance will emit steam into the drip
tray for cleaning. The appliance will
not rinse itself if the appliance is
still warm when switched on or if
no beverage was dispensed be-
fore it was switched off.
7.2 Dispensing beverages
Find out how to prepare a drink of
your choice.
WARNING
Risk of scalding!
Freshly prepared drinks are very hot.
Leave drinks to cool down if ne-
▶
cessary.
Do not let escaping liquids or
▶
steam come into contact with your
skin.
7.3 Dispensing a coffee drink
made from fresh beans
Place a cup under the outlet sys-
1.
tem.
To set the coffee strength, press
2.
the
button repeatedly.
Press button
3.
a The coffee is brewed and then dis-
pensed into the cup.
Tip: To stop the current dispensing
step early, press the
button.
7.4 Dispensing drinks with
milk
You can make coffee drinks with milk
or froth up milk.
operation en
or
.
or
45