EMPTYING AND CLEANING THE DIRT CONTAINER
IMPORTANT: Always switch off and unplug the vacuum cleaner
from the electrical socket before assembling, opening or
emptying the dirt container, or before connection / disconnecting
the attachments. Check the pre-motor filter every time you empty
the dirt container and tap against a bin to remove dirt/debris if
required. Do not use your vacuum cleaner without all of the filters
in place.
The motor is equipped with a thermal cut-out. If for any reason
the unit should overheat, the thermostat will automatically turn
the unit off.
14. Remove dirt container by pushing down the dirt container release
button and lifting the dirt container.
15. Hold dirt container over a bin. Pull the dirt release clip at the bottom
of the container, the dirt release door will open allowing dirt/debris
to fall out.
CLEANING THE PRE-MOTOR FILTER AND SPONGE
16. Lift the dirt bin lid release clip.