Daily Use; Using The Hood - ZANKER KHV64770BA Benutzerinformation

Function
Filter notification
6
7
Lamp

3. DAILY USE

3.1 Using the hood

Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones
or burners.
While boiling and frying big quantities of food without a lid, big humidity.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
The hoods light works independently
to other hood functions. To illuminate the
cooking surface touch
To turn off the appliance press the
again.
Description
Reminds to change or clean the charcoal filter and clean the
grease filter.
Turns the lights on and off.
.
symbol
3.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
3.3 Activating Maximum Motor Speed
When you touch
Speed starts to operate for minutes. After that
time, the appliance returns to its previous
speed settings.
When the function is turned on,
additional touch on
effects.
, the Maximum Motor
does not have any
ENGLISH 27