Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you familiarise
yourself with your power tool and teach you how to
use it for its intended purpose. The operating manu-
al include important instructions for the safe, proper
and economic operation of the power tool, for avoiding
danger, for minimising repair costs and downtimes and
for increasing the reliability and extending the service
life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the power tool in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The power tool may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of identical devices must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1.
On/off switch
2.
Transport handle
3.
Pressure switch
4.
Quick coupling (regulated compressed air)
5.
Pressure gauge (vessel pressure can be read off)
6.
Pressure vessel
7.
Supporting foot
8.
Drain screw for condensate
9.
Wheel
10. Housing cover
11. Motor
12. Oil sealing plug
13. Air filter
14. Safety valve
15. Wheel hub screw
16. Oil-level window
A. Supporting foot
B.
Washer
C. Securing ring
D. Fixing nut
E.
Connection pin air filter
F.
Protection screw
G. Screw
J.
Air filter cover
K. Insert air filter
L.
Filter element
3. Scope of delivery
• Compressor
• Operating manual
• 2 wheels
• Air filter
• Supporting foot
• Mounting material (see Fig. 3)
• Oil bottle
www.scheppach.com
GB | 23
Werbung
Inhaltsverzeichnis
Fehlerbehebung
