Automatic Channel Search (Rf In Aerial Connection); Channel Selection; Sound Settings; Volume - Medion MD 30036 Bedienungsanleitung

Automatic channel search (RF IN aerial connection)

1. Press the MENU button [8] on the remote control].
2. Select the TV-CHANNEL Menu point (5th Menu point in the Main Menu strip on the left of the picture [MAIN MENU]
with the directional button.
3. Confirm with the
4. Select the APS Menu point with the
5. Press the directional button, in order to start the automatic channel search. A bar showing the course of the search
will appear on the screen. Wait for the search to finish. It will take several minutes. Press the EXIT button to interrupt
the process.
6. The channels will be deposited in channel positions in a country-specific sequence. 100 channels can be stored.
Note
You will be able to change the sequence of the channel positions according to your requirements. Read how you
can sort the channels under the PROGRAM
from Page 20.
The channel search will be made by means of the respectively connected device, in the case of devices connected through
SCART or Component. Use the Instructions for Use of the signal source connected (e. g. DVB-T receiver or SAT receiver) as an
aid.

Channel selection

•
Press either one of the CH+ / CH- buttons on the device or one of the CHANNEL buttons [11] on the remote, or select
the channel directly by means of a number key, in order to select a channel. Press the
number.
•
You will select the channel broadcast most recently with the

Sound settings

Volume

•
You will increase or reduce the volume with the VOLUME buttons [18] on the remote or V+/V- on the device.

Mute

•
button [5] to switch the sound off or on again completely. The MUTE message will appear on the screen.
Press the

Sound output

•
You will choose between MONO and STEREO output with the NICAM button [4]; DUAL A and DUAL B. DUAL A and
DUAL B will only be able to appear if the current broadcast supports the DUAL Mode (e. g. in the case of dual-language
broadcasts).

Sound pre-setting

•
You will select the sound mode with the
14
directional button. The COLOR SYSTEM entry will be emphasized.
directional button.
INSERT Menu point in the in the 'TV-CHANNEL Menu' section
button [9].
[21] button: STANDARD, MOVIE, MUSIC, USER.
English
[19] button for a two-digit