Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons and the wheel
encoders. The device can be operated in stand-alone mode via the control board or in DMX-controlled mode
via any commercial DMX controller as well as wireless via QuickDMX with the optional available EUROLITE
QuickDMX USB Wireless Transmitter/Receiver.
Menu structure
The Control Board offers several features: you can easily set the starting address or select a DMX channel
mode.
The main menu is accessed by pressing Menu. Browse through the menu by pressing Up or Down. Press
Enter in order to select the desired menu. You can change the selection by pressing Up or Down. Press
Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided are listed as
follows.
If you press and hold Up or Down, the values change faster. The device has an automatic storage for all
settings. When you switch the device off and on again, it will operate with the previously set values.
If the device is not operated for 30 seconds, the buttons will lock. Unlock them by pressing any button for
about three seconds.
The device is additionally equipped with two wheel encoders. The use of these wheel encoders is possible
as long as there is no DMX signal at the DMX input.
Default settings in bold
MAIN level
Menu level
Def.Set
ON/OFF
DMX Addr
001-512
3CH, 4CH, 6CH,
DMX CH
8CH, 11CH
OFF/Dim1/Dim2/
Dimmer
Dim3/Dim4
Mas/Slv
Master/Slave
Red – 000 - 255
Col Set
Green – 000 - 255
Blue – 000 - 255
White – 000 - 255
Col Mac
R – R+G+B+W
Description
Reset to factory settings
DMX address setting
Setting DMX channel mode
Dimmer speed (step response)
OFF: Response characteristics of LEDs
Dim1: Response characteristics of halogen lamps, fast
Dim2: Response characteristics of halogen lamps, less fast
Dim3: Response characteristics of halogen lamps, middle
Dim4: Response characteristics of halogen lamps, slow
Master/Slave mode
Dimmer intensity of the LED colors /
stepless RGBW color mixture 000 – 255 (increasing)
Dimmer intensity red
Dimmer intensity green
Dimmer intensity blue
Dimmer intensity white
Preset colors
R
G
B
W
R+G
28/36
R+B
R+G+B
R+W
R+B+W
G+B
G+B+W
G+W
R+G+W
B+W
R+G+B+W
00146362, Version 1.0
Werbung
Inhaltsverzeichnis
