Beem FRESH-AROMA-PERFECT Gebrauchsanleitung Seite 32

EN
If the keep-hot function has been switched on beforehand, the device remains in opera-
tion for up to 40 minutes and the operating status indicator
flashes on the display as long as the keep-hot function is switched on. More informa-
tion can be found in the "Handling and Operation" chapter – "Keep-Hot Function".
Making Coffee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the "Handling and
Operation" chapter – "Time").
1. Prepare the coffee machine for the type of coffee you want to prepare (see previous
sections).
2. Keep the button Timer (27) pressed down for approx. 3 seconds until the operating status
indicator Timer flashes.
3. Use the buttons H (22) and M (21) to set the start time you want (see the "Handling and
Operation" chapter – "Time").
4. To make coffee with coffee powder, press the button
status indicator Timer is still flashing. The operating status indicator
To make coffee with coffee beans, the button
ating status indicator
indicator
5. To activate the preset time, press the button Timer again. The operating status indicator
Timer lights up constantly. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The display (19) shows
the programmed settings and
(18) or lights up.
If the operating status indicator Timer should stop flashing even though the setting has
not yet been completed, press the button Timer again for around 3 seconds. The oper-
ating status indicator Timer flashes again and the settings can be resumed.
Deactivating the Preset Time
To deactivate the preset time setting, press the button Timer (27). The operating status
indicator Timer goes out and the programming is deactivated. However, the preset time is
retained and can be reactivated at any time until a new preset time is programmed in or the
device has been disconnected from the power supply for more than a minute.
is lit up, press the button
goes out.
. Depending on the setting, the operating status indicator
continues to be lit.
(20) while the operating
lights up.
must be switched off. If the oper-
until the operating status
30