Mopp - Miele PWM 912 Programmübersicht

Mopp

To prevent coarse soiling in the machine, shake out the mops before putting them in.

Standard mops
Fabric
Programme se-
quence
Extras
Standard mops + rtu
Fabric
Programme se-
quence
Extras
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse bath
2nd pre-rinse bath can be activated via extra 
"Pre-rinse"
Main wash up to 90 °C, wash time 6 min
Cool down can be activated in the Miele Bench-
mark Programming Tool
2 rinse cycles
Final spin
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre mops
Same programme sequence as Mops standard
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
en - Programme summary
Load ratio/Load
size
PWM 912 – 12 kg
PWM 916 – 16 kg
PWM 920 – 20 kg
"Mops load size"
1:9
For number,
see
chart
117