metal objects, which could cause
bridging of the contacts. A short
circuit between the battery contacts may
cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes,
seek medical assistance. Leaking
battery fluid may cause skin irritations or
burns.
6) SERVICE
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
7) SPECIAL SAFETY DIRECTIONS FOR
BATTERY-OPERATED TOOLS
a) To reduce the electric shock haz-
ard, unplug the battery charger
from the mains before cleaning
the charger.
b) Do not subject the interchangea-
ble cordless screwdriver to strong
sunlight over long periods and
do not leave it on a heater. Heat
damages the battery and there is a risk of
explosion.
c) Allow a hot interchangeable
cordless screwdriver to cool be-
fore charging.
d) Do not use non-rechargeable bat-
teries!
8) CORRECT HANDLING OF
THE BATTERY CHARGER
• This device can be used by chil-
dren aged 8 and over and by
people with reduced physical,
sensory or mental capacities
or with a lack of experience or
knowledge, if they are supervised
or have been instructed regarding
safe use of the device and under-
stand the resulting risks. Children
are not permitted to play with the
device. Cleaning and user main-
tenance are not to be undertaken
by children without supervision.
• Keep the equipment away from
children and pets. Children
should be supervised in order to
ensure that they do not play with
the equipment.
• To charge the battery, use
only the charger supplied.
Risk of fire and explosion. This en-
sures that the safety of the device
is maintained.
• Before each use, check the
charger, cable and plug
and have them repaired by
qualified professionals and
only with original parts. Do
not use a defective charger and
do not open it up yourself. This en-
sures that the safety of the device
is maintained.
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications
on the charger rating plate.
Risk of electric shock.
• Disconnect the charger from
the mains before closing or
GB
IE
NI
9