Milnor MWF36J8 Bedienungsanleitung Seite 40

Routine Maintenance
Figure 21. Suspension Components on Each Side of Rubber Spring-resting Washer-extractor (see
Section 3.3.3 : About the Shock Absorbers, page
Rubber Spring - two on each
side
1... If cracks occur in the rubber spring, it is necessary to replace this component. Speak to your dealer or Mil-
®
nor . This is not routine maintenance.
2... If oil is present here, the seals are worn. Replace the shock absorber.
3... If the rubber in a connector is very worn or missing, replace the shock absorber.
34
33)
Shock Absorbers - 48040_
model shown
Legend
Shock Absorbers - 68036_
model shown
Pellerin Milnor Corporation