LD Systems MAUI G3 Serie Bedienungsanleitung Seite 6

ATTENTION:
1. Do not install or operate the appliance near any radiators, heat registers, stoves or other
heat sources. Always ensure that the unit is installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the appliance.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the unit.
6. Observe the IP protection class as well as the ambient conditions such as temperature
and humidity according to the specification.
7. Devices can be constantly further developed. In the event of any discrepancies between
the operating instructions and the appliance labelling with regard to operating condi-
tions, performance or other appliance characteristics, the information on the appliance
always takes precedence.
8. The unit is not suitable for tropical climates and for operation above 2000 m above sea level.
CAUTION:
Connecting signal cables can cause considerable noise. Make sure that devices connected to
the output are muted when plugged in. Otherwise, levels of noise can cause damage.
ATTENTION HIGH VOLUME AUDIO PRODUCTS!
This unit is intended for professional use.
Commercial operation of this appliance is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may
produce high sound pressure levels (SPL) which may cause hearing damage. Avoid exposure
to high volumes.
SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions is generally dependent on the
environmental conditions.
The range and signal stability are influenced by, for example:
• Shielding (e.g. masonry, metal buildings, water)
• High radio traffic (e.g. strong W-LAN networks)
• Interference
• Electromagnetic radiation (e.g. LED video walls, dimmers)
All range specifications refer to free-field application with visual contact without interference!
The operation of transmitters is subject to official regulations. These can vary from region to
region and must be checked by the operator before commissioning (e.g. radio frequency and
transmission power).
6