HomeMatic IP HmIP-FAL230-C6 Installations- Und Bedienungsanleitung Seite 63

The Homematic IP Floor Heating Controller can
be configured via the Homematic IP Wall Ther-
mostat (HmIP-WTH-2), via the Homematic IP Ac-
cess Point together with the smartphone app or
via the WebUI of the Homematic Central Control
Unit CCU3.
To configure the floor heating controller using the wall
thermostat, please proceed as follows:
• Press and hold down the control wheel of the
wall thermostat to open the configuration menu.
• Select the
wheel and confirm by pressing the control wheel
briefly.
• If the wall thermostat is connected to more than
one floor heating controller, please select the re-
quired floor heating controller using the control
wheel.
• Please define if you want to configure the device
parameters ("UnP1/UnP2") or the channel param-
eters ("ChAn").
All the settings that are made under "UnP1/UnP2"
Configuration via the Homematic IP Wall Thermostat
symbol by turning the control
63