Nilfisk SW5500 Bedienungshandbuch Seite 111

ENGLISH
SCHEDULED MAINTENANCE TABLE (Continues)
Procedure
Hopper lifting system hydraulic oil level check
Skirt height and operation check
Dust guard system water filter check and cleaning (optional)
Brake cables check/adjustment
Engine air filter cleaning
Hopper dust filter check and cleaning ("B" method)
Filter shaker operation check
Main broom drive belt visual inspection
Engine oil change
Spark plug check/cleaning
Steering chain cleaning
Steering chain check/adjustment
Safety device operation check
Engine baffle plate cleaning
Brake drums check/adjustment/replacement
Hopper dust filter check and cleaning ("C" method)
Main broom drive belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Fuel filter cleaning (diesel)
Paper engine air filter replacement
Spark plug replacement
Engine idle speed check/adjustment
Valve clearance check/adjustment
Hydraulic system oil change
Supply hose replacement (LPG)
Engine combustion chamber cleaning
Fuel hose check/replacement (diesel)
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more often in dusty areas.
(4) Or more frequently if the machine is used on slopes.
(5) Or every 6 months.
(6) And after the first 20 running-in hours.
(7) Maintenance procedures to be performed by an authorised Honda/Yanmar dealer.
(8) Change the hydraulic system oil after 500 hours or every year.
24
All manuals and user guides at all-guides.com
INSTRUCTIONS FOR USE
SW5500, FLOORTEC R 985 - 1466472000
Upon Every 10 Every 50
delivery hours hours
(2)
(*) (4)
(3)
Every 500 hours (7)
Every 2 years (7)
Every Every
Every
100 200
year
hours hours
(3)
(3)
(*)
(*)
(5) (6)
(*)
(*)
(2)
(7)
(*) (4)
(3)
(*)
(*)
(*)
(*)
(*)
(*)
(7)
(*) (8)
(*)
03/2016