Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 62

Adjusting the dispensing/ejection timing
When the plant falls into the ploughshare (A), the ejector
(B) should be in the rear position and should then start
pushing the plant to eject it.
B
UN41-0214DH
Proceed as outlined below.
1) Remove the pin (C).
2) Remove the lid (D).
3) Loosen the screws (E).
4) Turn the dispenser clockwise to speed up the ejec-
English language
ADJUSTMENT INFORMATION
A
Adjust the correct phase between the dispensing unit
and the ejector according to the different planting
speeds.
tor's pushing action or rotate the dispenser anticlock-
wise to delay the pushing action.
5) Tighten the screws (E).
6) Place the lid (D) on the dispensing unit.
7) Insert the plug (C).
20
5
D C
E
Use and maintenance