Kessel Minilift S Einbau- Und Betriebsanleitung Seite 29

4.2 Installing the pressure pipe connection
Lay the pressure pipe up to the required side (left or right)
of the system
Push the seal flat onto the outlet, at the same time align-
ing the groove and recess with each other.
Insert the outlet into the opening and fix with lock nut and
seal, tightening torque 10 Nm.
Close off unused opening with blind plug.
Connect the pressure pipe, note the connection options
shown on the right.
The adapter must be screwed on for versions B and C.
016-307 29 / 116