Operation Introduction - Topdon BT50 Bedienungsanleitung

OPERATION
INTRODUCTION
The tool is solely powered by the vehicle battery. Connect
the RED (+) Positive Battery Clamp to the (+) positive battery
terminal, and connect the BLACK (-) Negative Battery Clamp
to the (-) negative battery terminal. Ensure that the clamps
are securely attached to the correct terminals.
The LED display will show the message below:
Press the "OK" to enter the main menu, then choose your
preferable language.
6. About
1. BATTERY TEST (FOR 12V BATTERY)
TOPDON BT50 will test each battery according to the
selected actual system standard and rating marked on the
battery.
1. English
2. Fsançais
3. Deutsch
4. Español
5. Italiano
6. РУССКИЙ