Remington Volume & Curl AS7051 Bedienungsanleitung Seite 4

ENGLISH
All manuals and user guides at all-guides.com
• During use, always ensure the inlet and outlet grilles are not blocked in any way as this
will cause the unit to automatically stop. If this should occur, switch off and allow the
unit to cool.
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. 1000W power handle
2. 50mm thermal mixed bristle brush
3. 30mm retractable bristle curling brush
4. 21mm thermal mixed bristle brush
5. Concentrator
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Section the hair prior to styling. Style the lower layers first.
• Select your attachment before you turn on the appliance.
• Attachments can be connected to the power handle by aligning the arrow above the
attachment lock/release button with the power handle and clicking to the left to lock.
1. Plug the product into the mains power supply.
2. The product can be switched on by sliding the heat/speed setting switch to position G
3. Dry roots completely and dry length 90% dry, ready for styling.
4. To dry hair use the concentrator attachment.
5. For smaller and medium curls use the 21mm thermal bristle brush. Best for use
on short and medium length or layered hair.
6. To create medium to loose curls use the 30mm retractable brush.
7. The 50mm thermal volume brush adds root volume and fullness. it can also be
used to fix the ends of long hair and smooth out natural curls.
8. Select the desired temperature and speed setting using the switch on the
handle.
9. To increase the setting slide the heat/speed setting switch to position F.
4
6. Speed/ heat setting switch
7. Cool shot
8. Attachment lock/release button
9. Storage bag
10. Swivel cord