Cleaning And Maintenance - Fiap profifeed BeltFeeder PRO Gebrauchsanleitung

GB
profifeed

CLEANING AND MAINTENANCE

In order to guarantee a good continuity with the feeding, the profifeed
PRO
should be cleaned regularly during the season. Use a small brush to remove the
dust and food residues from the profifeed
BeltFeeder PRO belt. The profifeed
with gun oil. Resin-end oils must not be used. The integrated slide ring bearing is main-
tenance-free. In the event of inadequate or not performed maintenance, the guarantee
claim can expire.
Observe the relevant product videos on the subject of
cleaning and maintenance
https://www.youtube.com/user/FIAPGmbH
WEAR PARTS
The profifeed BeltFeeder PRO
include the clockwork and the conveyor belt. These are available as spare parts.
Wear parts are excluded from the guarantee.
Appropriate cleaning and care reduce wear and tear on the device.
REPAIR
Here you will find all the information you need to exchange spare and wear parts. Please
note and use the QR code under cleaning and maintenance.
STORAGE
If frost is expected, the device must be taken out of service and dismantled. First clean
the device as described under Cleaning and Maintenance. The device must be stored dry.
Make sure that the automatic feeder is set up frost-free.
DISPOSAL
The device must be disposed of in accordance with national legal regulations. This device
must not be disposed of as domestic waste. Make the device unusable by cutting the
cable and dispose of it via the return system provided.
If the device contains light sources, they must be disposed of using the return system
provided for this purpose.
Ask your specialist dealer.
BeltFeeder PRO
BeltFeeder PRO
BeltFeeder CLOCK
in our Youtube channel:
must be cleaned and oiled regularly. Wear parts
FEEDING
BeltFeeder
and on the profifeed
must be regularly oiled
9