Installation And Commissioning - Fiap profifeed BeltFeeder PRO Gebrauchsanleitung

FEEDING GB
BeltFeeder PRO
profifeed
Keep the power plug and all connection points dry! Lay the connection cable so that it
is protected to prevent damage. Only use cables, installations, adapters, extension or
connection lines with protective contact that are approved for outdoor use. Do not carry
or pull the device by the connecting cable! The device must not be operated if the cable
or housing is defective! If the power cord of the device is damaged, the device must be
disposed of; it is no longer possible to replace the power cord. If the cable is damaged,
the device must be disposed of. Electrical installations on garden ponds must comply with
international and national installation regulations. Never open the housing of the device or
its associated parts unless this is expressly stated in the instructions for use.
Never make technical changes to the device, this leads to the immediate expiry
of all warranty and guarantee claims. Use only original spare parts and accessories.
Have repairs carried out only by authorized customer service centers.
If you have any questions or problems, please contact a qualified electrician for your own
safety!

INSTALLATION AND COMMISSIONING

BeltFeeder PRO, the original, has been the most frequently used
The profifeed
BeltFeeder PRO
automatic feeder for years. The profifeed is available in two sizes
(capacity 3 kg and 5 kg) and with three different clockwork running times (4 hours, 12
hours and 24 hours).
BeltFeeder PRO
The difference between the profifeed and the profifeed
BeltFeeder
is the drive shaft made of seawater-resistant aluminum with an integra-
ted conveyor belt. The newly developed spring-loaded centering bolt enables the entire
conveyor belt to be removed with a single movement, and thus user-friendly cleaning and
BeltFeeder
disinfection. The built-in sliding ring bearing ensures that the profifeed
CLOCK runs smoothly and precisely. This innovation relieves the movement and extends
its service life.
Numerous scientific studies have shown that the distribution of the daily ration over as
many feedings as possible is decisive for high feed conversion and the avoidance of load
BeltFeeder PRO
peaks with regard to water quality. The profifeed is ideally suited
for feeding fry, saplings and for dosing buffer substances or medicines. The housing and
the cover have excellent weather resistance and a long service life. The profifeed BeltFee-
der PRO is a MUST for every production company or hobby grower.
BeltFeeder PRO
On the lower part of the profifeed there are 4 mounting bra-
ckets for secure attachment.
8