3.3 INSTALLATION
warning!
Before installing the vacuum, it is important to carry out a thorough preventive visual
inspection to identify any damage occurred during transport.
In the event that one or more components are damaged, DO NOT CONTINUE with installation and inform the
manufacturer about the anomaly and agree upon the actions to be taken. The vacuum is already equipped
with a suction filter.
Attach the required accessory to the end of the suction hose.
Note: the suction hose with its ends and accessories are provided as a STANDARD.
Contact your retailer for information regarding OPTIONAL accessories that can be used with this vacuum model.
Ensure that the power supply line corresponds to the voltage and frequency indicated on the vacuum
identification plate (see 1.3).
Volt
Dust class
The socket to power the vacuum must be protected by a mains disconnect switch.
In the event that an extension must be used, ensure that it complies with the EC standard; also ensure that it
is in perfect state and that it has a cross-section suited to the power consumption of the vacuum.
Attention!
Carefully follow the safety instructions when handling live equipment.
Sede Legale: Via Corsica, 143 - 25125 Brescia - Italy
C.F. e P. IVA 02709500983
Serial Number
Model
Hertz
Kw
IP
Kg
Amp
Year
IT
EN
DE
ES
25