GF U3000 V2 Betriebsanleitung Seite 47

User Manual
To configure any of the digital outputs:
FLOW READING OPTION
Data Review
Zero Cutoff (m/s)
Set zero flow (m/s)
Damping (secs)
Totaliser
Reset +Total
Reset -Total
Calibration factor
Roughness factor
Diagnostics
Exit
Pulse output
Setting Option / default
Quantity per Volume:1.000 m3
Pulse Energy:3600.0kJ
Pulse 50ms
Duration
Contact Type Normally Open/
Normally Closed
DD-MM-YY HH:MM:SS
: 0.00
: 0.00
: 10
: Run
: 1.000
: 0.01
Setting
Quantity per
Pulse
Activation Level
Deactivation
Level
1. From the MAIN menu, use the Up and Down scroll keys
to select Setup Instrument. Press the ENTER Key. With
Output selected in the Options menu, press the ENTER Key.
Alternatively, from a Read Flow/Velocity/Energy screen,
press the OUTPUTS key (3). The Output Board menu is
displayed.
2. Use the UP/DOWN arrow keys to select Digital Device
1/2/3 Setup. Press the ENTER key. The Output 1/2/3 menu
is displayed.
3. Use the UP/DOWN arrow keys to select Function. Press the
ENTER key.
4. Use the UP/DOWN arrow keys to scroll through the output
types: Pulse Output, Alarm Output or Frequency Output.
With the required output selected, press the ENTER key.
5. Edit the settings as required (see below).
Pulse output
Option / default
Volume:1.000 m3
Energy:3600.0kJ
Volume: 0.5m3
Flow: 30000 l/min
Energy:1800 kJ
Power: 2.5kW
Signal: 0.5
Volume 0.475m3
Flow: 28500 l/min
Energy:1710 kJ
Power: 2.375 kW
Signal: 0.5
Pulse output
Setting Option / default
Quantity per Volume:1.000 m3
Pulse Energy:3600.0kJ
Low Value Flow:0.00 l/min
Power: 0 kW
Signal:0
High Freq. 200 Hz
High Value Flow: 1000.00 l/min
Power: 5.00 kW
Signal: 1
Outputs
47