Description Of Terminals - urmet Percom VOG 5+ 1761 Installationsanleitung

2. INSTALLATION
IMPORTANT For the correct operation of gesture commands, do not install the device in places
exposed to direct sunlight because the IR sensor is sensitive to light.
• Embed the flush-mounting box Mod. 503 in the wall or the flush-mounting box Ø 60 at the height shown
in the following drawing.
The flush-mounting box Mod. 503 can be installed either horizontally or vertically.
• Fix the bracket to the mounting box as indicated.
• Make the connections to the terminal board.
• Fix the door phone to the bracket.
• Remove the protective film from the display.
• Power on the system.
Box Mod. 503
n° 2 M3,5 x 19 mm
provided
1
2

2.1. DESCRIPTION OF TERMINALS

}
S-
Call repeater
S+
]
Panic alarm
PANIC
]
Floor call
FC
DS1761-032
Box Ø 60 mm
n° 2 M3,5 x 19 mm
countersunk screws
n° 2 screws and screw
anchors included
7