Moza Air 2S Benutzerhandbuch Seite 22

Motor Output
The payload of Air 2S is from 300g to 4200g. Different payload requires different motor
power to achieve the best stability. There are three methods for adjusting the output of
the motor:
Auto-tuning operation method:
a. Install the camera and adjust the balance
b. Unlock all motor lock
c. Turn on the stabilizer, long press the center button to enter the menu, select
'Gimbal' > 'Motor' > 'Power' > 'Auto-tune'
d. During the auto-tuning, the stabilizer will vibrate automatically to match the most
suitable output value. Wait for about 5 seconds, the stabilizer stops shaking, and the
auto-tuning completes.
Set the output gear:
Factory default presets 5 groups of motor output values, which are suitable for cameras
of different weight levels.
Customize the output value of each motor:
The users can customize the output value of each motor to reach more precise control
of the motor output. The adjustment range is 0 to 100.
Note:
1. Under the camera lens combination of the limit, the auto-tuning function
may not accurately calculate the appropriate output value. Please manually
adjust the motor output according to the situation.
2. If the motor output is too low, the video is not stable enough; if the motor
output is too high, it will cause high-frequency vibration of the stabilizer.
3. When the motor output is at the critical value, the stabilizer will not vibrate in
the upright state, but it will vibrate in the forward or inverted state. Please
reduce the motor output moderately.
22