Product Specification; Accessories; Technical Parameters - YATO YT-82920 Originalanleitung

PRODUCT SPECIFICATION

The cordless polisher is a universal, portable tool which does not require an external power source, designed for DIY enthusiasts
to polish and grind surfaces made of diff erent materials with abrasive paper. Its specifi c advantages will be appreciated by DIY
enthusiasts performing various assembly and fi nishing works. As the proper use of the power tool is a condition for the correct,
reliable and safe operation of it, please
Read and keep the entire manual before the fi rst use of the tool.
The manufacturer shall not be held liable for any damage resulting from failure to observe the safety regulations and recommen-
dations specifi ed in this manual.

ACCESSORIES

The product is supplied complete and does not require assembly. The product comes with: battery, charging station (charger),
additional handle, polishing disc and sponge polishing pad.

TECHNICAL PARAMETERS

Parameter
Catalogue No.
Operating Voltage
Revolutions (idle speed)
Noise level
- sound pressure
- power L
wA
Ingress protection rating
Protection class
Vibration level
Weight
Maximum grinding disc diameter
Battery type
Battery capacity
Charger
Input voltage
Mains frequency
Rated power
Output voltage
Input current
Charging time
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.
O R I G I N A L
10
GB
Units
[V]
[min ]
-1
[dB]
[dB]
[m/s ]
2
[kg]
[mm]
[Ah]
[V~]
[Hz]
[W]
[V]
[A]
[h]
I N S T R U C T I O N S
Value
YT-82920
18 DC
1500 - 5000
88,0 ± 3,0
99,0 ± 3,0
IP20
III
15,540 ± 1,5 / 18,859 ± 1,5
1,8
150
Li-ion
3
220 - 240
50 / 60
60
21 DC
2,4
1,5