Tesla RoboStar iQ400 Plus Bedienungsanleitung Seite 19

3. Create your account in the "Smart Life" application and log in.
4. Enable all the permissions that the app asks for:
ANDROID - enable the "Location" and "Nearby devices" app permissions.
APPLE - enable "Location", "Bluetooth" and "Local Area Network" application permissions.
5. Switch on the robotic vacuum cleaner with the "Main switch (2)".
6. After logging into the "Smart Life" app, click the "+" icon on the top right, then click "Add Device".
7. "Discovering devices" will be displayed, click "Add", "TESLA RoboStar iQ400 Plus" will be
displayed, click the "+" icon, Wi-Fi network will be displayed, enter the Wi-Fi network password (if
already not found automatically) and click "Next". The robotic vacuum cleaner will start pairing
with the app.
8. After successful pairing, a green icon will appear next to the name and your robotic vacuum
cleaner "TESLA RoboStar iQ400 Plus" has been successfully added to the application.
9. Click "Finished", now it is possible to control the selected functions of the robotic vacuum cleaner
with your smartphone.
SOLVING PROBLEMS WITH THE APPLICATION

Make sure that the Wi-Fi signal coverage for your smartphone and robotic vacuum cleaner is good
and strong enough. Set up the robotic vacuum cleaner for the first time near your Wi-Fi router.

Make sure "Location" (GPS) is enabled on your smartphone.

Make sure that a third-party application (VPN, antivirus, firewall, etc.) is not blocking access to
your smartphone.

Try connecting to another Wi-Fi router or Wi-Fi Hotspot in another smartphone to rule out an error
on the part of your Internet connection.

You have too many devices connected to your Wi-Fi router, or the ability to connect a new device
to it is blocked.

Reset your Wi-Fi router.
Note: Make sure the charging station is within range of a good quality and strong Wi-Fi signal so it can
connect to a Wi-Fi network while charging. The robotic vacuum cleaner also needs this Wi-Fi
connection during its charging so that it is properly oriented and available to start cleaning. A Wi-Fi
network operating at a frequency of 2.4 GHz and WPA1 or WPA2 security is supported.
ROBOTIC VACUUM CLEANER FIRMWARE UPDATE
The firmware of the robotic vacuum cleaner is continuously improved. If a new firmware version is
available, you will be offered the option to download the update in the application and install it on the
robot vacuum cleaner.
WATER WIPING
Place the robotic vacuum cleaner outside the charging station and press the "2" button to turn it off.
APPLE
search for "Smart Life" in the Apple Store