Energetics ET 12.0 Bedienungsanleitung Seite 4

Handling
A. After assembly, the rear stabilizer can be adjusted to accommodate slightly uneven ground. Turn the
adjustment knobs on the ends of the rear foot caps to level the rear stabilizer to the floor.
B. The transportation wheels on the front foot caps allow for easy manoeuvring. Simply pull back on the
handlebars until the wheels touch the floor. Then roll the unit to a desired location.
C. The swivel tube (7) has several bores for adjusting to various positions. Position one of the bores so that it
is aligned with the tapped hole in lower swivel handlebar (6). To lock this position, insert knob (38) and
screw into the tapped hole.
(Caution! The position thus set should always be the same on both sides. The positions can be changed
as required at any time by unscrewing the knob (38) and moving the swivel tube (7).
D. The pedals can be adjusted to personal preference. Removed the two knobs at side of the pedal and
Place the pedal in the desired location and secure in place by reattaching the knobs.
4