Cameo OTOS B5 Bedienungsanleitung Seite 27

Test Sequence Pre-programmed sequence to test all components
Test Stress Test
Engine Test
Reset Service
Service
Timer
Password For service purposes only
SYSTEM INFORMATION (System Info)
Starting from the main display, press MENU to enter the main menu (Main Menu). Select System
Info using UP and DOWN and confirm with ENTER.
See the table below for information on the sub-menu items in the Info menu.
System Info
Firmware
Temperature
Fan Speed
Runtime
RDM-UID
Show DMX values
Error Info
DMX Table
Pre-programmed sequence to test all components under
maximum load
Activate all motors individually with values of 000 to 255
No Do not reset service operation time
Yes Reset service operation time
DISP
NET
DRV
...
Head
Base
..
Temperature Unit
xxxx RPM
Total
Operation
Lamp
Lamp Strikes
Service
RDM Unique Identifier
Displays the applied DMX values
Error display in case of malfunction
Display of DMX mode tables
Vx.x.x
Vx.x.x
Vx.x.x
Vx.x.x
xxx °C / °F
xxx °C / °F
°C
°F
Display of the speed of the corresponding fans
xxxx h : xx m
xxxx h : xx m
xxxx h : xx m
xxxx h : xx m
xxxx h : xx m
Display of the
firmware version of
the corresponding
component
Display of the
temperature of
the corresponding
component
Setting the
temperature unit
Total operating time
Usable time
Lamp operating time
Illuminant starts
Operating time after
service appointment
27