Herunterladen Inhalt Inhalt Diese Seite drucken

DS Produkte 06382 Bedienungsanleitung Seite 19

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. When all components are dry, insert
the EPA11 filter into the metal filter.
7. Insert the metal filter into the dust
container and twist it clockwise to
secure it.
8. Close the dust container.
Cleaning the Exhaust Air Filter
1. Twist the filter compartment cover (24)
anticlockwise and take it off.
2. Pull the exhaust air filter out of the
exhaust air filter compartment (23).
3. Tap out and brush out the exhaust air
filter and the exhaust air filter com­
partment. The exhaust air filter can
also be rinsed out with clear water, but
it must be completely dry before it
is assembled!
4. Insert the cleaned exhaust air filter into
the exhaust air filter compartment.
5. Place the filter compartment cover on
and twist it clockwise to secure it.
Cleaning the Motor Unit, Extension
Tube and Nozzles
Wipe down the motor unit (2),
the extension tube (3) and the
nozzles (1, 4, 7) with a damp cloth if
necessary. Then wipe them dry.
Remove hair and fluff from the nozzles
and brushes.
06382_Inlay_DE-EN-FR-NL_A5_V1.indb 19
06382_Inlay_DE-EN-FR-NL_A5_V1.indb 19
Cleaning the Floor Nozzle
To make it easier to clean, the brush can
be removed from the floor nozzle (7):
1. Turn over the floor nozzle so that the
bottom is pointing upwards.
2. On the right side there is a catch next
to the small wheel. Slide the catch
outwards.
3. Take out the brush and remove any
dirt and contamination.
4. Reinsert the brush. When you do this,
insert the end with the star­shaped
recess first. Then press the other end
into the holder.
5. Slide back the catch until it engages.
Storage
Store the device and accessories in
a cool, dry place which is protected
from direct sunlight and is out of the
reach of children and animals.
The brush nozzle (4) and crevice
nozzle (1) can be plugged onto the
nozzle holder (5) on the extension
tube (3) (Picture E).
Hang the motor unit (2) with the
suction opening (21) facing downwards
into the wall mounting bracket (6).
L
To prevent a deep discharge of
the battery, charge it up every
3 months if it is not used for a
prolonged period.
EN
19
28.04.2022 16:55:05
28.04.2022 16:55:05

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pc-p017e

Inhaltsverzeichnis