Screen Lock/Unlock; Selecting The Operating Function - BWT HI-HC 66 Bedienungsanleitung

Auto mode icon
Water temperature
at the inlet
Water at the inlet
Water temperature
at the outlet
Water at the oulet
Symbol
Notes :
Screen automatically locks after 30 s without any operation with it
When screen is locked :
VI.1) Screen lock/unlock :
- If screen is locked, press
- If screen is unlocked, also press
VI.2) Selecting the operating function :
There are three operating functions available (heating/ cooling /auto) :

If the auto function is active (
depending on the difference between the actual pool water temperature and the set point temperature: if
the water is colder than the set point temperature, heating mode will be activated, if the water is warmer
than the setpoint, cooling mode will be activated.Thus, the heat pump will automatically keep the water
temperature at the set point value.
When this function is active, the set temperature can be fixed between 12 and 40°C.

The heating function
overpasses the set value due to the ambiant conditions, the heatpump keeps off, and will not cool the water.
Heating indicator
Designation
1.Power on/off
ON/OFF
2.Wifi setting
Lock-unlock /
Locking / unlocking the screen
Mode selection Mode selection
Speed Select Smart/Silence mode
Up / Down
Adjust set temperature
a. the buttons are not displayed except the unlock one
b. when the heat pump is off, screen is dark and "0%" is displayed
for 3 seconds to unlock it, buttons and icons are displayed
for 3 seconds to lock it, it shuts off (
), the machine will automatically go into heating or cooling mode
only enables to increase the water temperature.If the water temperature
Cooling indicator
Wifi Signal
Function
2019/11– C - Code : 33315
Compressor running
Current power, in %
of max. power
Smart/Silence mode
still lit)
34 /76