Connecting To An Audio System Via Hdmi Earc; Connecting To An Audio System Via Optical Audio Cable; Connecting To An Audio System Via Analogue Audio Cable; Connecting To The Mains Supply - Loewe bild c Betriebsanleitung

Loewe bild c | User Manual Loewe bild c | User Manual
 
Connecting to an audio system via HDMI eARC | Connecting to an audio system via analogue audio cable
Connecting to the mains supply | Getting started - first steps
Connecting to an audio
system via HDMI eARC
Audio System
HDMI ARC/eARC
Use an HDMI cable (not supplied) to connect
HDMI eARC socket of the TV set to the HDMI
ARC/eARC socket of an audio system or sound-
bar. It is recommended to use a cable marked
as „Ultra High-Speed HDMI Cable" with a Type
A connector.
Ultra High Speed HDMI Cables are designed
to support the new eARC feature in addition
to the highest resolution video modes. The
Standard HDMI Cable with Ethernet and the
High Speed HDMI Cable with Ethernet will also
support eARC.
Connecting to an audio
system via optical audio cable
Before making this connection, ensure you
removed plastic protection caps from the cable
connectors.
TV set
Audio System
OPTICAL
Connect the audio output of the TV labelled
TOSLINK to the digital audio input of an audio
system.
21
Connecting to an audio sys-
tem via analogue audio cable
TV set
Analogue ampli er
AUDIO IN
R
L
HDMI2
Use a stereo cinch/jack adaptor cable to con-
nect the audio output AUDIO OUT to the analo-
gue audio input of the audio system.
Connecting to the mains
supply
Connect the TV set to a 220-240V mains socket.
Plug the mains supply cable into the mains
supply connector (AC IN) of the TV and guide
the cable out of the TV as shown on the picture
below.
14
Connect the mains supply plug of the mains
supply cable to a power outlet.
TOSLINK
TV set
AUDIO
OUT

Getting started - first steps

Before starting the TV for the first time, make
sure that you have completed the connection
of your external devices and that the TV is con-
nected to the power supply.
1. Press the (Standby) button on the
remote control to turn on the TV.
2. You will be welcomed by the Installation
wizard which will help you to set up the TV
set in a few simple steps.
To navigate in the Installation wizard:
• Use the arrow buttons to select the
desired item.
• Press the OK button to confirm the
selected item.
• Press the button to go back
one step.
STEP 1 – Select the language
– Connecting to the internet
STEP 2
Optional step. If you wish to skip this step, press
the right arrow button.
If you have connected the TV to your home net-
work with an Ethernet cable and your network
configuration allows DHCP, you will be automa-
tically connected to the Internet.
Alternatively, you can use Wi-Fi connection.
You must first select your network from a list of
available networks. You will then be prompted
to enter your Wi-Fi password. You can do this
by typing on the on-screen keyboard.