Warning; Introduction; Technical Details; Components - Sagola PSAM500 Gebrauchsanleitung

1. Warning

Before starting the unit you must read, take into consideration and comply with all the
indications described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.U.

2. Introduction

This unit belongs a the family of devices designed to spray products with compressed air with a
spray gun, providing a high level of product transfer and excellent quality finish, as well as low
levels of contamination.
The equipment consists of the following:
• Airless Spray gun
• Case

03. Technical details

Maximum operating pressure: 500 bar (7,252 psi)
Dimensions: 165 x 206.5 mm. (6.5 x 8.1")
Product inlet: 1/4" GAS B.S.P. swivel
Product outlet: 3.20 mm. (0.13") (diffuser head)
Parts in contact with the fluid: Stainless steel, Nylon, Aluminium, Viton, Tungsten Carbide and
Copper.
Maximum operating temperature from 0 - 60
Community directive complied with
Explosive atmosphere (Atex)
(*) Non electric gun in explosion hazard areas (ATEX) must have the earthing connections and/or static-free feed hoses.

04. Components

1 Tip protector
2 Diffuser head
3 Trigger
4 Needle
5 Spray gun filter
6 Fixed nozzle
7 Product inlet
• Filter 100-mesh (Yellow)
• Assembly wrench
Weight: 549 g. (1.21 Ibs)
o
C
2014/34/EC
1
6
ENGLISH
II 2G x (*)
2
3
4
5
7