Inhaltsverzeichnis
Werbung
RS 25 18.0-EC
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a measurement method
standardised in EN 62841 and may be used
to compare one tool with another.
It may be used for a preliminary assessment
of exposure. The specified vibration emission
level represents the main applications of the
tool.
However, if the tool is used for different
applications, with different cutting accessories
or poorly maintained, the vibration emission
level may differ.
This may significantly increase the exposure
level over the total working period.
To make an accurate estimation of the
vibration exposure level, it is also necessary
to take into account the times when the tool
is switched off or running but not actually in
use.
This may significantly decrease the exposure
level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
cutting accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear defenders at a sound pressure above
85 dB(A).
Technical data
Tool
Type
Rated voltage
No-load speed
Stroke
Sawing capacity
in wood
Sawing capacity
in aluminum
RS 25 18.0-EC
one-handed
reciprocating saw
Vdc
18
r.p.m 0-3000
mm
25.4
mm
210
mm
30
Sawing capacity
in metal pipe
Weight according
to"EPTA
Procedure
01/2003"
(without battery)
Battery
Weight of
battery/kg
Working
Temperature
Storage
Temperature
Charging
Temperature
Charger
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1
Lock-off button
2
Pivoting shoe
3
Variable-speed trigger switch
4
Tool-less blade clamp sleeve
5
LED lights
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless one-handed
reciprocating saw and check that here are no
missing or damaged parts.
mm
110
kg
1.9
AP 18.0/2.5
18V
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5
Kg
AP 18.0/5.0
AP 18.0/8.0
-10 － 40℃
< 50℃
4~40℃
CA 10.8/18.0, CA 18.0-LD
0.4
0.7
1.1
13
Werbung
Inhaltsverzeichnis
