Use; Device Overview; Operation; Led Status Display - Intenso MAGNETIC WIRELESS CHARGER MB13 Bedienungsanleitung

USE

Device overview

1 - Magnetic charging area (smartphone)
2 - Charging area (TWS or smartphone)
3 - Status LEDs
1
4 - Charging area (Apple Watch)
5 - USB-C IN
5
2
4
3

Operation

LED status display

When you connect the device to the mains, the LEDs flash green once and blue once to confirm and then
remain off. If you use the left charging area or charge an Apple Watch on the right side of the Wireless
Charger, the charging process is indicated by the respective LED on the front. During the charging process,
the corresponding LED lights up blue continuously. When the mobile device is fully charged, the respective
LED usually changes from blue to green (depending on the device being charged). If a LED flashes blue
quickly, there is an error; for example, the device is not positioned correctly, it has become too hot, there
is a foreign object between the devices or an incompatible power supply unit is being used. If you use the
magnetic stand of the wireless charger, no LED lights up; the charging process is shown on the display of
the smartphone.
Start-up / charging compatible devices
Step 1: Preparation
Connect one end of the supplied USB-C to USB-C cable to the USB-C port (USB-C IN) of the inductive char-
ging station and connect the other end of the USB cable to the supplied power supply unit (HP8). Next,
connect the power supply unit to a power socket (follow the safety instructions).
Step 2: Start charging
You can charge three different devices (simultaneously) with this wireless charger.
a) Magnetic stand
You can dock your MagSafe-supporting iPhone onto the magnetic stand in the middle. The magnets on both
sides ensure ideal alignment and the charging process starts automatically and is displayed on the screen of
your smartphone. Please note that the use of a case can reduce the magnetic force.
EN - Page 4 of 6