Reset Button; Resetting The Default Settings - G&D ControlCenter-Compact Serie Installation Und Bedienung

Reset button

Reset button
The Reset button is placed between the Power LEDs and the Identification LED on the
front panel of the central module.
This button allows you to reset the default settings and disable the netfilter rules.
NOTE:
To prevent you from pressing the button by accident, you are required to
use a thin, pointed object for pressing the button.

Resetting the default settings

Pressing and holding the button during the booting process resets the default settings
of the central module.
NOTE: After the function has been carried out, the default settings of the central
module do apply again. However, the purchased premium functions remain unal-
tered.
How to reset the default settings of the central module:
1. Turn off both power packs of the central module.
2. Press and hold the Reset button on the front panel of the device.
3. Keep the button pressed and turn the device on.
4. Release the button when the green Status-LED starts blinking.
NOTE:
You can also use the Config Panel web application to reset the default settings.
17 · G&D ControlCenter-Compact