Operation; Turning The Device On; Power-On Sequence; Operating Panel - Mahe MMS2000 Bedienungsanleitung

4. Operation

4.1.

Turning the device ON

Always use the main switch to turn On and Off the device, never use the power
plug for this purpose!

4.1.1. Power-on sequence

After powered special power on sequence is started on the operating panel, to give the user
information about the firmware.
a) Firmware type (in voltage window)
Fm – Front panel IM
b) A mperage rating (in Ampere window)
200 – 200Amp
c) Firmware revision (in Ampere window) r11 major . minor revision numbers.
4.2.

Operating Panel

MMS2000C
EN
9