1. KEY
The frontispiece shows the version of this document in the form Vn.x. This version indicates that the document is valid for all software
versions of the device n.y. For example: V3.0 is valid for all Sw: 3.y.
In this document the following symbols will be used to avoid situations of ranger:
Situation of general danger. Failure to respect the instructions that follow may cause harm to persons and
property.
Situation of electric shock hazard. Failure to respect the instructions that follow may cause a situation of grave
risk for personal safety.
2. GENERAL
Read this documentation carefully before installation.
Skilled personnel: Installation must be carried out by competent, skilled personnel in possession of the technical qualifications required
by the specific legislation in force. The term skilled personnel means persons whose training, experience and instruction, as well as
their knowledge of the respective standards and requirements for accident prevention and working conditions, have been approved by
the person in charge of plant safety,authorizing them to perform all the necessary activities, during which they are able to recognize
and avoid all dangers. (Definition for technical personnel IEC 364).
The appliance may not be used by children under 8 years old or by persons with reduced physical, sensory or mental capacities, or
who lack experience or knowledge, unless they are under supervision or after they have received instructions concerning the safe use
of the appliance and the understanding of the dangers involved. Children must not play with the appliance.
Ensure that the product has not suffered any damage during transport or storage. Check that the outer
casing is unbroken and in excellent conditions.
2.1
Safety
Use is allowed only if the electric system is in possession of safety precautions in accordance with the regulations in force in the
country where the product is installed.
2.2
Responsibility
The Manufacturer does not vouch for correct operation of the machine or answer for any damage that it may cause if it has been
tampered with, modified and/or run outside the recommended work range or in contrast with other indications given in this manual.
2.3
Particular warnings
Always switch off the mains power supply before working on the electrical or mechanical part of the
system. Wait for the warning lights on the control panel to go out before opening the appliance. The
capacitor of the direct current intermediate circuit remains charged with dangerously high voltage even
after the mains power has been turned off.
Only firmly cabled mains connections are admissible. The appliance must be earthed (IEC 536 class 1,
NEC and other applicable standards).
Mains terminals and motor terminals may still have dangerous voltage when the motor is stopped.
ENGLISH
17