Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DANGER
Work area
•
Turn off the engine, set the parking brake, and block the tires before working on a vehicle.
•
Keep the work area clean and well ighted. Cluttered benches and dark areas increase the risk of
injury to persons.
Personal safety
•
Stay alert. Watch what you are doing and use common sense when operating the tool. Do not
use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating the tool increases the risk of injury to persons.
•
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and
gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to
persons as a result of being caught in moving parts.
•
Use safety equipment. Wear safety goggles and heavy-duty work gloves during use.
Tool use and care
•
Do not force the tool. Use the correct tool for the application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
•
Store the tool when it is idle out of reach of children and other untrained persons. A tool is
dangerous in the hands of untrained users.
•
Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that affects the tool's operation. lf damaged, have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
•
Use only accessories that are identified by the manufacturer for the specific tool model. Use of an
accessory not intended for use with the specific tool model, increases the risk of injury to
persons.
•
Avoid off-center loads. lf the Pump seems unusually hard to operate, immediately stop. Adjust the
Ram to eliminate or diminish an off-center load. The Flange Base and Flange Head must only be
used together to prevent an off-center load.
•
Protect the Hose. Do not drop heavy objects on the Hose. Avoid kinks in the Hose. Maintain
proper clearance to avoid damage to the Hose and Couplers.
•
lnspect repair before using vehicle. Repairs to structural or frame members must be inspected by
a qualified technician to ensure that the structure is still strong enough to safety fulfill its function.
Service
•
Tool service must be performed only by qualified repair personnel.
•
When servicing a tool, use only identical replacement parts. Use only authorized parts.
SPECIFICATIONS
Capacity: 10 Ton
Ram stroke: 135 mm
Ram min height: 358 mm
Pump working pressure: 620 Bar
COMPONENTS
16 Breather valve (Oil filler screw)
44 Handle
A Pump
26 Release valve
21 Hose
22 Hose coupler
D Warning line
B Ram
5 Connecting nut for hose coupler
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Hydraulic oil capacity: 0.5 L
Spreader capacity: 0.5 Ton
Spreader opening: 16-90 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Werbung
Inhaltsverzeichnis
