Altrad BELLE PCX 13/40E+ Bedienungshandbuch Seite 21

GB
Safety Instructions
SAFETY DECALS
A - Lifting Point Decal
Lifting point for use with a Sling or Mechanical Hoist.
B. Low HAV Decal.
Highlights that the machine has a HAV level low enough that it can be used for more than 8hrs.
C. General Safety / Info Decal.
101
Read the Wear Ear Wear Eye Wear Protective
Operators Protection Protection Footwear
*Indicates the
Manual
Noise Level
of the
Machine
* Also see Technical Data section for Noise Level for this machine.
D. Operating Instructions Decal.
Includes information on how to Start and Stop the Power Unit.
DO NOT
Jetwash the
Machine
E. Handle Latch Decal.
The Handle Latch is not required when the Wheel Kit is not in use.
1. Disengage the Wheel Kit.
2. Pull the plunger and rotate the latch anti-clock wise to its stop position. Release the plunger to lock the latch in the unlock position.
The Handle Latch is ALWAYS required when the Wheel Kit is engaged.
1. Pull the plunger and rotate the latch clock wise until it locates over the handle tube. Release the plunger to lock the latch in the
lock position.
2. Engage the Wheel Kit.
F. Speed Setting Decal.
Highlights that the compactor has 3 speed settings which can be altered by pressing the 'Speed Chage' button on the power unit.
CAUTION
The compactor ALWAYS starts on the fastest speed when the power unit turned ON.
21