Turbotronic Cyclone V11 Bedienungsanleitung Seite 9

CLEANING THE VACUUM CLEANER
When the device is switched off and disconnected from the charger, youcan
wipe the device with a dry cloth.
Do not use abrasive rags or cleaners, steel wool, acetone, or alcohol.Never
immerse the vacuum cleaner in water.
Store the device in a dry, cool place out of the reach of children.
CLEAN THE ELECTRIC FLOOR NOZZLE
Hair and lint can get caught in the brush, which must be removed fromtime to
time so that the suction power does not deteriorate.
1.
Slide the button on the bottom of the floor nozzle to the left and removethe
cover.
2.
Remove the cylinder brush. Use scissors to cut the hair and lint caughtin the
cylinder brush and remove them.
3.
After cleaning, put the cylinder brush back in the nozzle, put the coveron it,
and push the button to the right again.
7