Hohem iSteady Pro E Bedienungsanleitung Seite 13

Calibration
It requires to calibrate the gimbal if you notice it is not work properly as below.
1. The pitch angle is not level with the horizontal surface.
2. The roll angle is not parallel to the horizontal surface.
3. The pan axis drifts when the gimbal is on all lock mode.
Calibration Instruction
Method 1: Off-line Calibration
(1) Power on the gimbal, long press the mode button over 6 seconds till the mode light on.
(2) Laying the gimbal on a static flat surface without any vibrate. Calibration is completed
once the mode light flash twice.
Method 2: 6-Side Calibration Via App
Please make sure the gimbal is connected with app via bluetooth successfully, then enter
"Calibration" and follow the instruction in the app to calibrate the gimbal.
*If the off-line calibrationis not
useful, please refer to [ Method 2]
12