INSTRUCTION MANUAL
SMART RETROFIT KIT
Assembly (continued)
1. Open dispenser with key. Then raise the
hood, and swivel it forwards.
3. Carefully remove dummy plugs with a
flat head screwdriver.
(1)
(1)
Dummy plugs
22
UDU 5 T
2. Remove dispenser bottle from dispenser.
4. Click electronics box into dispenser.
(1)
(2) CLICK
(2) CLICK
5. Secure cable guide to housing wall with
two M3 nuts.
7. Remove plastic cover of pump unit and
dispose of correctly.
6. Position fill level sensor on dispenser
backwall (1). Then bend both side tabs
inwards (2).
(2)
(1)
45°
8. Insert cable of electronics box in
pump unit.
(2)
23