Technical Data; Unpacking; Commissioning - Scheppach 7906100717 Originalbetriebsanleitung

• Never direct the airflow towards yourself or towards
other people.
• Hoses whipping around can cause serious injuries.
Therefore, always check that the hoses and their
fasteners are undamaged and have not loosened
off.
• Cold air must be drawn away from the hands.
• Do not use quick connectors on the tool mount of
impact and pulse screwdrivers. For threaded hose
connections, use only those made of hardened steel
(or a material of comparable impact resistance).
• If universal swivel couplings (claw couplings) are
used, locking pins must be inserted and use Whip-
check hose locks to provide protection in the event
of a failure of the connection of the hose to the ma-
chine or of hoses to each other.
• Make sure that the maximum pressure indicated on
the machine is not exceeded.
• In torque-controlled machines with continuous rota-
tion, the air pressure has a safety-relevant effect on
the performance. Therefore, requirements for the
length and diameter of the hose must be specified.
• Never carry air-operated machines by the hose.

6. Technical data

Air consumption
Operating pressure
Square drive
Max. torque
Max. speed
Air supply
Required air quality
Compressors
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
Technical changes reserved!
141 l/min
max. 6.3 bar
1/2" (12.7 mm)
310 Nm
7000 min
-1
via maintenance unit with
filter pressure reducer
and oil misting device
cleaned, condensate-free
and oil-misted
with at least 50 l tank
volume
105 dB(A)
94 dB(A)
3 dB(A)
www.scheppach.com
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
7.

Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!

8. Commissioning

Note: The device is ready for operation after mounting
the plug nipple.
Insert socket attachments or bit
• ATTENTION! Always insert the desired bit before
connecting the device to your compressed air sys-
tem. Always disconnect the compressed air supply
from the compressed air connection (2) before at-
taching or changing sockets (13) or bits.
• Connect the appropriate socket attachment (13),
with extension attachment (8) if necessary, to the
drive.
• Slide the socket attachment (13) over the square
drive (7).
• Make sure that the snap ring locks into the groove
of the socket attachment (13).
GB | 25