Remote Control - Soundcore Infini 2 Benutzerhandbuch

The optical port cannot be used when a TV is connected to
T
the soundbar via HDMI port.
Option 3: Connect to Other Devices via AUX Cable or
USB Port
Using Your Soundcore Infini 2
Press to power on or switch to standby
Press to switch between optical, HDMI ARC,
Bluetooth, LINE IN, and USB mode in order
Press to enter Bluetooth pairing mode
Volume down
Volume up
The soundbar will automatically switch to standby mode
T
when no audio input is received for 20 minutes.
The soundbar will wake up from the standby mode when
any button is pressed or source input is received.
5 EN
LED Light Guide
Standby mode
LINE IN mode
Bluetooth connected
Bluetooth pairing
Optical mode
USB mode
HDMI ARC mode

Remote Control

Insert the batteries into the remote control. Point the remote control
at the remote sensor on the front panel.
The remote control works within a distance of about 26 ft / 8 m
from the sensor and within an angle of about 30 degrees from the
left and right side.
Solid red
Solid green for 10s, then fades out
Solid blue for 10s, then fades out
Slow blue blinking
Solid yellow for 10s, then fades out
Solid cyan for 10s, then fades out
Solid purple for 10s, then fades out
EN 6