Haier HWS42GDAU1 Bedienungsanleitung Seite 30

Troubleshooting
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
improper repairs can cause considerable consequential damages.
▶ A damaged supply should only be replaced by the manufacturer, its service agent or
Error Code Cause
The opening time of the
P2
door is too long.
The temperature of the upper
H1
temperature zone is too high.
The temperature of the lower
H2
temperature zone is too high.
The temperature of the upper
L2
temperature zone is too low.
The temperature of the lower
L3
temperature zone is too low.
E6 The upper fan motor fault .
E8 The lower fan motor fault.
26
Solution
Please close the door.
Please contact our after-sales service.
Please check ambient temperature
should be between 10 °C and 38 °C.
Please contact our after - class service.
EN