Settings - Samsung NQ5B6793AA-Serie Benutzerhandbuch

CAUTION
• Do not cancel descaling in the process. Otherwise, you must restart the
descaling cycle and complete within the next three hours in order to enable
steam assisted modes.
• To avoid accidents, keep children away from the oven.
• For the mixture ratio of water and the descaling agent, follow the agent
manufacturer's instruction as it precedes.
Drain
After using the steam assisted modes, you must drain the remaining water to
prevent affecting other cooking modes. Also, if you want to drain again for
cleaning purposes, use this function.
1. Touch the button on the control panel.
2. Select Cleaning, and then press the Dial Knob.
3. Select Drain, and then press the Dial Knob.
4. Select START, and then press the Dial Knob.
5. Follow the instruction on the screen, select OK, and then press the Dial Knob.
• The oven drains water from the steam generator to the water reservoir.
6. When draining is complete, empty the water reservoir.
• After emptying the reservoir, clean it before putting it back to the oven.
WARNING
• Wear oven gloves when you handle the water reservoir.
• Do not remove the water reservoir while draining.
NOTE
Once the oven starts draining, please wait until the draining cycle is complete.

Settings

Touch the button on the control panel, select Settings, and then press the Dial
Knob to change various settings for your oven.
Please refer to the following table for detailed descriptions.
Menu Submenu
Connections Wi-Fi
Easy Connection
Remote
management
Description
You can turn the Wi-Fi on or off.
You can connect the oven to the
SmartThings server via a Wi-
Fi connection. When the oven is
connected, you can use the SmartThings
app to check the status of the oven
and/or control it from a mobile device.
Select Activate, and then press the Dial
Knob to allow the Call Centre to access
your oven remotely to check internal
information.
English 25