Overheating warning
If the interior of the appliance is at an exces-
sive temperature for more than 36 hours, the
control panel will display the
indicator (9).
(9)
04
When this happens depends on the temper-
ature you have set.
Set interior
temperature
+1 °C to +10 °C
0 °C to –11°C
–12 °C to –30 °C
If this happens,
•
check the appliance using the information
in the troubleshooting table for possible
faults (see "Troubleshooting table" on
page EN-27).
"Overheating"
The indicator will
be displayed once
the actual interior
temperature is
>
>
+15 °C
≥
≥
+10 °C
≥
≥
–8 °C
Operation
The indicator
"Overheating" (9) will go out if
the interior temperature falls below a particu-
lar threshold value:
Set interior
temperature
+1 °C to +10 °C
0 °C to –11°C
–12 °C to –30 °C
From this moment onwards, the 36-hour pe-
riod starts all over again.
•
Check the appliance during the 36 hours
after the
"Overheating" indicator (9)
goes out repeatedly, to be sure that the
fault has been rectified.
Interior light
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Do not remove the cover from the in-
terior lighting.
■ Do not attempt to replace the interi-
or lighting.
Maintenance-free LEDs are used as lights. If
the interior light does not work, please con-
tact our service department (see page EN-29).
Page EN-13
Threshold value
≤
≤
+12 °C
≤
≤
+5 °C
≤
≤
–11 °C