FAQ
Q1. Why did I fail to connect the camera to the monitor ?
Make sure to plug the power adapter into the camera and socket firmly.
•
Make sure the camera and the monitor are within effective distance.
•
Q2. Why is the video so blurry ?
Make sure there is no obstacle on the lens of the camera.
•
Q3. Why did the monitor make noise ?
The camera and monitor may be too close. Put them further apart.
•
Please adjust the angle of the antenna to minimize wireless interference.
•
Q4. Can I hear my baby when I turn off the screen ?
Yes. You should turn on Sound Detection, and it will wake up the screen and
•
make a sound alarm if a loud sound is detected.
Q5. Why is the picture black and white ?
The Night Vision Mode will be activated if the camera worked in a dark
•
environment (Brightness
Q6. How long will the monitor stand by with screen on ?
The monitor can last about 4 hours, and the time of endurance varies depending
•
on brightness.
SPECIFICATIONS
Frequency range
Transmit Power
5 Lux).
17
2410-2477MHz
<=13dBm