Connections; Connecting And Linking The Power Supply; Connecting And Linking The Audio Signal - dB Technologies FIFTY-Serie Bedienungsanleitung

English

2. CONNECTIONS

CONNECTING AND LINKING THE POWER SUPPLY

On FIFTY LINE, you can link the power supply from the first speaker to the next, up to a total of 6 (1+5) in countries
with a 220–240Vac mains supply and up to 3 (1+2) in countries with a 100–120Vac mains supply.
To supply power to a system, simply connect the power cable provided to the MAINS INPUT on the first subwoofer
and connect a second cable with suitable connectors (optional) from the MAINS LINK output to the MAINS INPUT
of the next subwoofer. Repeat the connection to power the top under all circumstances up to the maximum
permissible current specified on the MAINS LINK connector of the first speaker.
FIFTY SUB 1
POWER
POWER
SOURCE
SOURCE

CONNECTING AND LINKING THE AUDIO SIGNAL

When connecting the system audio signal, connect the sound source to the "INPUT" of the first subwoofer first of all.
Then connect a balanced XLR cable from the "OUTPUT LINK" of the first subwoofer to the "INPUT" of the second
one. Repeat this step from the second subwoofer to the top.
FIFTY SUB 1
Balanced Audio
Input
AUDIO
AUDIO
SOURCE
SOURCE
Fifty Line
FIFTY SUB 2
This device complies with
part 15 of the FCC Rules.
Operating in subject to the:
following two conditions:
(1) This device may not
cause harmful interference.
and (2) this device must
accept any interference
received, including
interference that may
cause undesired operation.
FIFTY SUB 2
Balanced Audio
Output Input
Link
FIFTY TOP
This device complies with
part 15 of the FCC Rules.
Operating in subject to the:
following two conditions:
(1) This device may not
cause harmful interference.
and (2) this device must
accept any interference
received, including
interference that may
cause undesired operation.
FIFTY TOP
Balanced Audio
Output
Link
This device complies with
part 15 of the FCC Rules.
Operating in subject to the:
following two conditions:
(1) This device may not
cause harmful interference.
and (2) this device must
accept any interference
received, including
interference that may
cause undesired operation.
Input Output
Link
Cod. 420120397 REV. 1.0
35