Key; Battery Replacement - Assa Abloy eCLIQ N0.001 BA3 Bedienungsanleitung

Key

Battery replacement

N0.001 BA2 (Design 2) - Replace Bat ter y (Pic. 7, page 86)
A
At tention!
Replace the battery within 30 s: Stored data is kept for 30 s. Time-re-
stricted authorisations are lost after the time has expired, for example.
A new battery must be inserted within this time span.
We recommend replacing the battery after 30,000 openings or within
3 years. The battery warning must be observed.
1 Rotate the battery cover 15° anti-clockwise.
2 Note the alignment of the battery cover based on the mark.
3 Remove the cover.
4 Pay attention to the correct polarity of the battery and insert a new
type CR2032 battery.
5 Fit the battery cover in place again with the alignment in which it was
removed.
6 Rotate the battery cover on the key grip 15° clockwise.
42 EN Key